For a sleek and modern look, our undermount sinks are the way to go. These sinks are installed below the countertop for a seamless look, and are available in a range of materials and sizes. Our undermount sinks are made with high-quality materials for long-lasting performance and easy maintenance.
HOMES is one of the most professional OEM/ODM factories of stainless steel Undermount sinks in China. Compared with other similar products, what unique advantages do the Undermount sinks produced by us have?
1. Using high-quality 304 stainless steel material
As one of the materials with the best anti-rust performance, 304 stainless steel is one of the best materials for manufacturing Undermount sinks.
This is because the metal elements in it will form a waterproof and scratch-resistant protective film, which can isolate oxygen and moisture and prevent the metal surface of the sink from rusting. Therefore, the 304 SS Undermount sink is also easier to clean and more sturdy.
In addition, some products manufactured by HOMES through OEM use 16-gauge heavy-duty stainless steel with a higher thickness, and there are also products with a thickness of 1.2MM (18 Gauge), both of which are suitable for corresponding kitchen scenarios.
Among them, the sink made of 16-gauge heavy-duty stainless steel has better load-bearing capacity and is not easy to deform, making it suitable for large commercial kitchens, large family kitchens, and high-end residential kitchens.
The Undermount sink with a thickness of 1.2MM (18 Gauge) is lighter in weight and occupies a relatively small volume, making it most suitable for ordinary kitchens with low usage frequencies, small apartment kitchens, etc.
2. Excellent noise reduction treatment
Generally, in a family kitchen, when using an ordinary sink, the noise generated is approximately between 50 and 60 decibels (dB). This noise is quite obvious and will significantly affect the cooking experience.
People who have cooked before know that excessive noise in the kitchen can make those cooking feel irritable. Moreover, when washing tableware with a large amount of water, the noise of an ordinary sink will also interfere with normal conversations in the kitchen.
The Undermount sink manufactured by HOMES through OEM has a sound-absorbing pad designed at the bottom, which can reduce the noise of water flow. Under the same water flow conditions, the noise of this sink can be reduced to between 40 and 45 decibels (dB).
3. Good waterproof design
In the kitchen, due to changes in temperature and humidity, the bottom of ordinary sinks is prone to generating condensed water. According to statistics, for sinks without an anti-condensation water coating, the amount of condensed water generated every day in summer can reach 200 to 300 milliliters.
If this condensed water leaks onto the kitchen floor, it will make the floor slippery, increasing the risk of family members, especially the elderly, slipping. It may also cause the kitchen cabinets to become moldy.
However, the Undermount sink manufactured by HOMES through OEM is equipped with an anti-condensation water coating to prevent water from leaking onto the kitchen floor.
Through simulated tests, under the same environmental conditions, the generation amount of condensed water can be reduced by more than 80%, extending the service life of the kitchen cabinets.
4. Humanized water flow design
The Undermount sink manufactured by HOMES through OEM adopts an X-shaped water flow line design, which can make the water flow into the drain quickly, reducing water stain residues and making it easier to clean the kitchen.
In addition, this unique design can make the sink dry as soon as possible, reducing the possibility of bacterial growth, avoiding the generation of odors from food residues, and protecting the health of family members.
